Lindy 42693 Manual De Usuario página 3

User Manual
Introduction
Thank you for purchasing the Lindy 50m USB 2.0 Cat.5 Extender. This product has been designed to
provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The USB Cat.5 Extender is composed of a transmitting and receiving unit and enables any USB host
device to send data up to 50 meters. In addition, by adding an additional USB Hub, several USB devices
can be connected.
Package Contents
•
Transmitter/Local Unit
•
Receiver/Remote Unit
•
Multi-Country Power Supply
•
LINDY Manual
Features
•
Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
•
Operates with USB 2.0 high speed host controllers and USB 1.1 classic hosts
•
Further devices can be added by connecting an additional USB hub
•
True plug and play without any driver installation
•
Compatible with all USB Type A equipped computers
•
Supports distances up to 50 meters using Cat.5/6 cables
•
LED indicator
•
Power supply for remote unit included
Specification
•
Local Unit: 1 x USB 2.0 A male, 1 x RJ45 female
•
Remote Unit: 1 x RJ45 female, 1 x USB 2.0 A female
•
Power Supply 5V / 2A DC with 4 exchangeable power supply plugs for Europe, Great Britain, North
America and Asia
•
Dimensions: 30x60x15mm (1.18x2.36x0.59in)
•
Operating Temperature: 0° - 70°C (32°F - 158°F)
Installation
Transmitter:
•
Plug the USB A plug of the Transmitter into a USB A female port of your PC or laptop
•
Connect a Cat.5/6 cable up to 50 meters long with the other end connected to the RJ45 port on the
Receiver (see below)
Receiver:
•
Connect your USB device such as keyboard, mouse, printer, hard disk drive, etc. with a standard
USB cable to the USB A female port
•
Power DC 5V Jack: Plug the supplied 5V 2A DC power supply into the unit and connect the adaptor
to an AC wall outlet.
•
Connect a Cat.5/6 cable up to 50 meters long with the other end connected to the RJ45 port on the
Transmitter (see above)
Installation
English