Publicidad
Idiomas disponibles
Idiomas disponibles
CHECK THE CONTENTS
•
ZZFM3000
•
Operating instructions
•
Power cable
•
Wireless remote controller
FEATURES
As one of the most professional fog machines, ZZFM3000 is a massive fog generator and
delivers a powerful fog to create the best atmospheric effect.
It equips with "microprocessor, electronic temperature control system, high precision
temperature control PCB and brand new professional heating elements.
Built-in LCD control panel enable timer function with adjustable fog output. Fill up a
venue within very short time. Smooth and stable smoke even at 1% output.
•
Available for timing, output 1-100% precisely adjustable;
•
One heater with two output nozzles, two pumps system;
•
Enormous output, fill a venue within seconds. 100% output 30 seconds continuous
work;
•
Super stable and durable;
•
No fluid protection;
•
Strong anti-interference ability;
•
Anti-loose powercon;
•
Built-in LCD control, wireless control and DMX control. Equipped with 3-pin and
5-pin DMX sockets.
INSTALLATION
1.
After ensuring all the accessories are intact, position the machine on a flat surface,
and open the cover of the road case in front.
2.
Press the fluid tank's quick connector by thumb and forefinger, and take it out
quickly to disconnect the tube and the fluid tank. Take out the tank and uncover the
cap. Pour the high quality fluid into the tank carefully, then tighten the cap. Put the
tank into the machine and push the connector lightly to connect the tube and fluid
tank. The machine which is broken because of using poor quality fluid will not have
guarantee.
3.
Connect the power cord to the machine. Please make sure of the required electricity
voltage and that electricity outlet is grounded.
4.
There is ON/OFF power switch for this unit, When turn ON, the LCD panel will
display "WARMING UP" .
5.
It requires about 7 minutes for heating up. When the process of heating up finishes,
the LCD display will show "READY TO FOG"
3
Publicidad
