Publicidad
Idiomas disponibles
Idiomas disponibles
Step 3: Add the Device to the App
1.
Open the app, tap the "+" button on the top right corner of the
2
interface, and then select the "Add Device" option. Select the
"Smart Camera" option and then choose the corresponding
model purchased.
2.
Tick "Next" if you have finished the above steps on the
1
interface. Select the desired Wi-Fi and enter the correct
password. Then tap the "Next" button.
3.
Show the QR code towards the device lens, and the camera will
2
scan the QR code. Once you hear a sound prompt and the
Status LED blinks blue slowly, tap the "I Heard a Prompt"
button on your mobile, the App will connect the device
automatically.
Note: Please hold the phone about 15-20 cm (6–8 inches) away
from the camera. You can slightly move your mobile device
forward and backward for better scanning.
4.
You can manually change the name of the device once you see
2
the message "Added successfully" on the mobile app. To
finish the setting, tap the "Done" button.
Note: If you failed to connect your device to Wi-Fi, press and hold
the RESET Button for 5 seconds until you hear a sound prompt and
the Status LED blinks blue rapidly, then repeat the above steps.
Watching the Videos from Browser
1.
Vi s i t
h t t p s : / / i p c - u s. i s m a r t l i fe. m e,
corresponding data server on the top right corner of the
interface.
2.
Use NGTeco Home App to scan the QR code to login to your
account.
3.
Click the corresponding device to watch the live videos.
a n d t h e n s e l e c t t h e
5
Publicidad
