Publicidad
Idiomas disponibles
Idiomas disponibles
2. OPERATING INSTRUCTIONS
2.1. Product Description
1. Motor part with grinding area
2. Transparent lid
3. On/Off switch
4. Blade
2.2. Product usage
Grinding coffee
• Take care not to overload the unit. Do not fill coffee beans
beyond the brim of the unit. To start the coffee grinder, place
the transparent lid onto the motor part, and press and hold the
On/Off switch. To stop it, simply release the On/Off switch.
• Do not operate the coffee grinder for more than 30 seconds at a
time. Longer operation does not result in a finer grind but simply
overheats the coffee resulting in loss of aroma. With time, you
will find your desired consistency of grind.
10
coffee grinder
• After grinding your coffee, remove the transparent lid from the
motor part and pour out the coffee grounds. For additional
accuracy, use the calibrations on the side of the transparent lid.
Note: for optimal flavours, it is recommended to grind coffee
beans immediately before brewing.
Using the coffee grinder
• Ensure that the coffee grinder is switched off and unplugged
from the mains power supply.
• Position the coffee grinder onto a flat, stable surface at a height
comfortable for the user.
• Remove the transparent lid and add up to 60 g of coffee beans,
spices or nuts to the aluminium bowl.
• Replace the transparent lid by pushing it securely into place,
then plug the coffee grinder into the mains power supply.
• Press and hold the On/Off button to begin grinding. To stop
grinding, release the On/Off button.
• After use, unplug the coffee grinder from the mains power
supply, remove the transparent lid and pour out the ground
food.
Note: do not operate the coffee grinder for more than 30 seconds
at a time. After 30 seconds of continuous use, allow the coffee
grinder to rest for 30 seconds.
Caution: 60 g is only a guide; ensure that you do not fill the coffee
grinder above the aluminium bowl's border.
2.3. Maintenance
• Always ensure that the coffee grinder has fully cooled and is
unplugged from the mains power supply before performing any
cleaning or maintenance. Clean the transparent lid in warm,
soapy water, then rinse and dry thoroughly.
• Do not use harsh or abrasive cleaning detergents or scourers to
clean the coffee grinder, as this could cause damage.
EN
KCG4380
11
Publicidad
