Konix DRAKKAR ODIN Manual De Instrucciones página 3

ASSEMBLY INSTRUCTIONS
STEP 1
Turn the base plate of the gaming chair
upside down. Remove the 4 screws lo-
cated underneath the base plate, match
the mechanism with the screw holes on
the base plate. Finally screw the mecha-
nism on the base plate using the 4 screws.
STEP 3
Attach the 5 wheels to the metal foot,
then place the gas lift into the middle of
the reinforced metal foot as shown on the
picture.
STEP 2
Fit the backrest on the reclining mechanism on
each side of the base plate of the gaming chair.
Then follow the screwing process as shown on
the picture: first, screw the reclining mechanism
to the backrest of the seat (steps 1 and 2) then
close the plastic covers and screw them on
(steps 3 and 4).
STEP 4
Place the gaming chair's base plate mechanism
onto the gas lift, and the setup is complete.
A
3