Descargar Imprimir esta página

ian QAD-90011 Manual De Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
To avoid possible electric shock or personal injury, and to
avoid possible damage to the Meter or to the equipment
during testing, adhere to the following rules:
Inspect the Meter's case before using it, do not use the
Meter if it is damaged or the case (or part of the case) is
missing. Look for
cracks or missing plastic. Check the insulation around the
connectors.
Inspect the test leads for damaged insulation or exposed
metal. Check the test leads for continuity.
Do not apply more than the rated voltage, as marked on
the Meter, between the terminals or between any terminal
and grounding.
The rotary switch should be placed in the right position
and no modification of range shall be made while testing
is being conducted to prevent damage of the Meter.
When the Meter is working at an effective voltage over
60V in DC or 30V rms in AC, special care should be
taken, as this poses a danger of electric shock.
Use the proper terminals, function, and range for your
testing.
3

Publicidad

loading

Productos relacionados para ian QAD-90011