PPA UNIVERSAL SMART CONTROL Manual

WARNING:
Do not use the equipment
without referring to this
manual rst.
MANUAL
UNIVERSAL SMART
CONTROL
P30398 - 04/2022
Rev. 0
Introduc on:
Congratula ons, you have just purchased a product with PPA quality and
safety. UNIVERSAL SMART CONTROL can be used to drive various infrared
equipment, replacing your conven onal controls.
Easy to configure and discreet, it allows the user to control and create rou nes
in their electronic equipment, through their smartphone through the PPA ON
App.
Technical Specifica ons:
Power
DC 5V 1A
Standby consumption
<0.5W
IR frequency
38KHz
IR Direction Multi-direction
Distance < 10M
Wifi IEEE 802.11b/g/n 2,4 GHz ,
Wi-Fi - Range 30 m without obstacles
App PPA ON | compatible systems iOS , Android
Operating Temperature 0 to 50°C
68 × 68 × 17 mm
Product dimension (W × H × D)
Product weight
62 g
Introduc on to the applica on:
Step 1: To download the "PPA ON" applica on, go to the Google Paly Store or
the Apple Store.
NOTE: The applica on is not available for Windows Phone (Microso )
opera ng system and other opera ng systems on the market, except the two
men oned above.
A er installing the applica on, follow the steps:
Step 2: Log in if you already have an account, if you do not register in the App,
entering informa on such as: Country and e-mail, a er entering the data click
on Get verifica on code.
Click Register soon
a er accep ng the
terms
User Agreement and Privacy Policy
We understand the importance of privacy.
In order to fully present our collection and
use of your personal information, we have
thoroughly reviewed our privacy policy and
user agreement in accordance with the
latest laws and regulations. By clicking
[Agree], it means that you have read,
understood and accepted the entire
updated Privacy Policy and User
Login with an existing account Agreement. Please take some time to
familiarize yourself with our privacy policy
Not accepted
Register
A er clicking on
obtain the
Enter the
Register
verifica on code it
authentication code
will be requested.
Brazil
your email@youremail.com
seu email@seuemail.com Your email@youremail.com
Obtain the veri cation code
Registry veri cation code The veri cation code has been sent to your
email address:
495XXX
brenosouzasilva099@gmail.com Resend (51s)
to verify your registration account
it is in the email
informed
Set password
a er entering the code the App
will ask for register one
Use 6 to 20 characters, mixing letters and
numbers
password.
Concluded
Step 3: Add a device, for this and turn off mobile data connect your
Smartphone to the WiFi network that the device will be connected to. Turn on
Bluetooth, turn on device loca on click '+' in the upper right corner.
No device
Cancel EZ Mode
Restart device first Turn on the device.
Turn off after 10
seconds and turn
on again.
Turn on the device.
Turn off after 10s and turn on again.
Back Next
Make sure your device is reset and in EZ Mode (LED flashing quickly / 2 mes
per second). If not, press and hold the reset bu on un l the LED flashes
quickly.
Step 4: Enter the WiFi network and password the device will connect to.
Click next.
Cancel
Cancel
Select a 2.4GHz Wi-Fi network
Add Device
and enter the password.
Make sure the Wi-Fi signal is stable
If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router
Configuration Method
Products_2.4GHz
productscx2
Analyze Register the Start
the devices device on the the device
Cloud
Next
Concluded
1 device found.
1 successfully added.
Successfully added
SMART UNIVERSAL CONTROL
SMART UNIVERSAL CONTROL
Device successfully added.
Living room Main bedroom
Second bedroom Dinner room
Kitchen Office
Next
Changing the Device Name
SMART UNIVERSAL CONTROL
To rename the device, tap it, then
Device information
Edit , in sequence
Instant Scene and Operator
Third-Party Support and Control
Share device with other users
«Share device» and «Add share number»
or «email»
Device Offline Notification
Add Share Complete
Offline Notification
2
Others
Country/ region Brazil
Device sharing
Account
number
1
Create group
Device update Is the latest version
Remove device
Remove device just click and go
ATTENTION !! IF THE DEVICE REGISTRATION PROCEDURE THROUGH THE
EZ MODE IS NOT SUCCESSFULLY CARRIED OUT, IT WILL BE NECESSARY TO
REGISTER THROUGH THE AP MODE.
Accepted
Step 5: Enter add device again. Enter the Wi-Fi network and password the
device will connect.
Click next.
Cancel
Cancel
Select a 2.4GHz Wi-Fi network
and enter the password.
If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router
Configuration Method
PPA
Password
Next
Make sure your device is reset, to enter AP Mode (LED flashing slowly 1 me
per second), tap EZ Mode in the app to change the mode. If not reset, press
and hold the reset bu on un l the LED flashes slowly.
Cancel EZ Mode Cancel AP Mode
Restart device first
Restart device first
Press the botton RESET for 5s.
Turn on the device.
Turn off after 10s and turn on again.
Back Next
Vuelve Back Próximo Next
Add Manually
A er connec ng to the Lamp, the App will ask you to login to the local network
(Smartlife-XXXX) that it will make available, a er connec ng to the local network,
go back to the applica on to con nue the switch registra on.
Universal Smart Smart Relay
Smart Alarm Module
Control
Cancel AP Mode
Restart device first
Smart IP Electrifier
HD Câmera
Light Switch Wi-Fi Plug Lamp
Press the bo on RESET for 5s again
un l the indicator flash slowly
Check if the indicator is flashing
slowly.
Vuelve Back Next
Your device has been successfully added, then tap Done.
Cancel EZ Mode
Cancel
Restart device first
Concluded
If the indicator is flashing quickly, skip the
reset step.
1 On
Successfully added
2 Press the PROG button for 5 seconds
3 Make sure the indicator light is flashing quickly.
LÂMPADA L...
SMART UNIVERSAL CONTROL
Restart devices
Confirm that the indicator flashes
quickly
Next
GENERAL TERMS AND CONDITIONS OF WARRANTY
MOTOPPAR da Amazônia Indústria e Comércio de Eletrônicos
Ltda, registered with CNPJ No. 09.084.119/0002-45, located at
Praça Linear, No. 100, Bloco II, Centro, Santa Rita do Sapucaí/MG,
CEP 37.500-000, manufacturer of the PPA and CITROX products,
Cancel
guarantees this device against defects in design, manufacture,
assembly and/or jointly and severally as a result of defects in the
Add Device
quality of the material that make it inappropriate or unsuitable for the
Make sure the Wi-Fi signal is stable
consumption for which it is intended, for a legal period of 90 (ninety)
days from the date of purchase, provided that the installation
guidelines described in the instruction manual are observed.
As a result of the credibility and trust placed in PPA AND CITROX
products, we added another 275 days to the above period, reaching
a total of 1 (one) year, also counted from the date of purchase to be
proven by the consumer through the proof of purchase (Supervisor
Note).
In the event of a defect, within the warranty period, the liability of PPA
and/or CITROX is restricted to the repair or replacement of the
device manufactured by it, under the following conditions:
Analyze Register the Start
the devices device on the the device
Cloud
1. The repair and readjustment of the equipment can only be
carried out by the Technical Assistance, which is qualified to
open, remove, replace parts or components, as well as repair
the defects covered by the warranty, and, in the absence of
this and any use of parts not originals contained in the use, will
Add Remote Control
result in the waiver of this term by the consumer;
2. The warranty will not extend to accessories such as cables,
screws kit, fixing brackets, sources, etc.;
3. Expenses for packaging, transport and reinstallation of the
TV Set-top Box TV Box
product are exclusively borne by the consumer;
4. The equipment must be sent directly to the company
responsible for the sale, representative of the manufacturer,
Air Fan Light through the address on the purchase invoice, properly
packaged, thus avoiding the loss of warranty;
5. The replacement or repair of the equipment does not extend
the warranty period.
Audio Prejector DVD
This warranty will be void if the product:
1. Suffer damages caused by agents of nature, such as
atmospheric discharges, floods, fires, landslides, etc.;
Camara Water heater Purifier 2. It is installed in an improper electrical network or even in
disagreement with any of the installation instructions set out in
the manual;
3. Defects caused by falls, blows or any other physical accident;
4. For violation of the equipment or attempt to repair by
unauthorized personnel;
5. It is not used for its intended purpose;
6. Not used under normal conditions;
7. Suffer damage caused by accessories or equipment attached
to the product.
Recommendation:
We recommend the installation and maintenance of the product by a
specialized technical service.
Share device
If the product has a defect or abnormal operation, look for a
Add a new family member to be able to share all
specialized Technical Service for the necessary corrections.
smart devices and scenarios.
Familiar settings
Device shared exclusively with the following users
Select a 2.4GHz Wi-Fi network
Motoppar da Amazônia Indústria e Comercio de Eletrônicos LTDA
and enter the password.
Praça Linear, 100, Bloco 2 - Centro
If your Wi-Fi is 5GHz, set it to 2.4GHz
Santa Rita do Sapucaí - MG - CEP 37540-000 - Brasil
before proceeding. Common Router
Configuration Method
CNPJ: 09.084.119/0002-45
www.ppa.com.br | +55 14 3407 1000
PPA
Next
AP Mode
Cancel
Restart device first
Confirm that the indicator is flashing slowly.
Then proceed to the next step.
Vuelve Back Next
Cancel
Conect the telefone Wi-Fi
Active
to hotspot device
1 Telephone conected access point showing
below
Atual network
Avalible network
PPA
TREINAMENTO PPA
2 Retorn to the app and continue add devices
MK Produtos PPA
MK Produtos PPA 5G
Connect now
Made by: