RiMO 551-HG-1 Manual De Instrucciones página 28

HEAT GUN
Safety Notes
Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
◼ Be careful when working with the power tool. The power tool produces intense heat
which can lead to increased danger of fire and explosion.
◼ Exercise special care when working close to inflammable materials. The hot air jet or
the hot nozzle can ignite dust or gases.
◼ Do not operate or work with the power tool in areas where there is a danger of
explosion.
◼ Never direct the hot air jet at the same position for longer periods. Easily inflammable
gases can develop e.g., when working plastic, paint, varnish or similar materials.
◼ Be aware that heat can be conducted to hidden covered materials and can ignite
them.
◼ After using, place the power tool down in a secure manner and let it to cool down
completely before packing it away. The hot nozzle can cause damage.
◼ Do not leave the switched-on power tool unattended.
◼ Store idle power tools out of the reach of children. Do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
◼ Do not expose the power tool to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
◼ Do not pull the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
◼ Always wear safety goggles. Safety goggles will reduce the risk of injuries.
◼ Disconnect the plug from the socket-outlet before making any adjustments,
changing accessories, or placing the power tool aside. This safety measure prevents
the unintentional starting of the power tool.
◼ Check the power tool, cord and plug each time before use. Do not use the power
tool if the damage is determined. Do not open the power tool yourself and have it
serviced only by a qualified repair person using only original spare parts. Damaged
power tools, cords and plugs increase the risk of electric shock.
Provide for good ventilation of your working place. Gas and vapor
developing during work are often harmful to one's health.
ENGLISH