Publicidad
PARTS IDENTIFICATION / GUIDE D'UTILISATION / IDENTIFICACIÓN DE LAS PIEZAS
1/2 watt Flashlight
Charging Input Contacts
Magnet
Flashing LED
ON/OFF Button
Flashlight ON/OF
Button
Hook
Magnet in Handle
Magnetic Connector Hub
& Charging Terminals
USB Charge Cable
USB Input
TECHNICAL INFORMATION / INFORMATIONS TECHNIQUES / INFORMACIÓN TÉCNICA
INTERNAL RECHARGEABLE BATTERY
LED LIGHTS
(In Tip)
CHARGING SPECIFICATIONS
120V AC/DC CHARGER:
(CE & C/UL Listed) - not included
12V DC CHARGER:
(CE) - not included
TEMPERATURE RANGE
DOT & TRAFFIC SAFETY COMPLIANCE
WEIGHT
DIMENSIONS
POWER DURATION
The battery will be fully charged with either charger within 3-4
hours and you may expect the following run times:
#1 - Directional Flash
#2 - Quad Flash
#3 - Alternating Blinks
#4 - SOS Rescue (Morse Code)
#5 - Steady On - high
Flashlight (operating alone)
Operating the flashlight with any of the
above flash patterns will reduce the
overall operating time.
1154/1155inst; cs10/22
SPECIFICATIONS
Lithium Polymer 3.7V - 1200 mAh
1 - 0.5 watt flashlight - 60 lumens
14 - 5mm, 20,000 MCD
Input: 100-240V AC, 50-60 Hz
Output: 5V DC, 1200 mAh minimum
Input: 10.8-14.8V DC
Output: 5V DC, 1200 mAh minimum
50ºF TO 104ºF (10ºC - 40ºC)
U.S. DOT (FMCSA) 49 CFR § 392.25 & 393.95
1.
(g) (prohibits the carrying of any flame-pro-
ducing flare on any Commercial Motor Vehicle
(CMV) transporting explosives; any cargo of
flammable liquid or flammable compressed
gas, whether loaded or empty; or any CMV us-
ing compressed gas as a motor fuel).
2.
MUTCD Type A (flashing) and Type C (solid on)
3.
NFPA 1901 Standards for Traffic Safety; Section
6.7.3 Miscellaneous Equipment
9 oz.
12.125" L x 1.75" W x 1.375" H
TYPICAL RUN TIME
13 Hours
16 Hours
8 Hours
12 Hours
7 Hours
8 Hours
AERVOE INDUSTRIES INCORPORATED
Gardnerville, NV 89410 • 1-800-227-0196
www.aervoe.com • mailbox@aervoe.com
BATON TRAFFIC
ROAD FLARE
#1154 Amber LEDs, #1155 Red LEDs,
#1156 Red & Blue LEDs
OPERATING INSTRUCTIONS
US Patent #D650,932S
and #8,579,460
Publicidad
