Rooster ASSET TRACKER Guia De Inicio Rapido

IMPORTANT SAFETY INSTRUCTIONS
Read and understand all instructions before
!
proceeding. Failure to follow all instructions may
result in electric shock, fire, property damage, and/
or serious personal injury. Please refer to the Rooster
Tracking System User Guide for detailed instructions on
setting up, installing and using Rooster devices.
1. Save these instructions. This Quick Start Guide and the
Comprehensive User Guide contain important safety and
operating instructions.
2. Rooster ® Hubs are designed to be powered by 12VDC
or 24VDC power supply, optional auxiliary solar panel, or
accessory AC Adapter (110 volts).
3. (Any known hazards? Shock? Electrical? Fire? Choking?
Radiation? Carcinogens? Iconography to go with these?)
4. Rooster ® Hubs contain no user serviceable parts or
components. (What else?)
5. Properly dispose of inoperable Activity Trackers. Activity
Trackers and Rooster Hubs contain batteries. Do not
®
burn or incinerate Rooster Hubs or Activity Trackers.
®
Please deposit used or unwanted Activity Tracker and
Rooster ® Hubs with an environmentally compatible
recycling facility.
6. Do not dispose of Rooster devices with household
®
waste material.
FCC WARNING (TBD)
SYMBOLOGY (TBD)
(Show "Read Operator's Manual" – anything else? Shock?
Fire? Choking?)
PRODUCT SPECIFICATIONS
Operating Environment: -22°F to 140°F (-30°C to 60°C)
System Minimums: Single Hub or 1 Activity Tracker and
1 Hub
Rooster Hub Dimensions: 4" x 7" x 2"
®
(102mm x 178mm x 51mm)
Activity Tracker Dimensions: 2" diameter x ¾"
(51mm x 19mm)
Hub Ingress Protection Rating: IP66
Tracker Ingress Protection Rating: IP67
Chemical Exposure Resistance: Short term exposure
to gasoline, diesel fuel, motor oil, and other common
construction chemicals
Shock Resistance: Resistant to vibration or sudden shock
UV Resistance: Resistant to UV exposure
Power Supply: 12VDC or split 24VDC, auxiliary solar panel,
or an AC Adapter (110 volts)
Upload Frequency: 8 minutes
Orientation Sensitivity: TBD
Movement Sensitivity: TBD
Range: TBD
Hub Backup Battery: 6 Hours
Rooster Hub Product Life: 5 years
®
Activity Tracker Product Life: 24 months
Vehicle Battery Rundown Resistance: Rooster
feature low battery/low voltage detection to prevent
battery run down of the host vehicle/equipment
Cellular Network: AT&T cellular network in North America,
and the Vodafone cellular network in Europe. Users Do
Not need to have an account with AT&T or Vodafone.
Secure Communication: Rooster
® Hubs and Activity
Trackers communicate only with devices that are part
of the Rooster system.
®
®
ROOSTER
Begin by downloading the Rooster
Rooster ® Account. The Rooster App is available as a free
download from the Apple App Store, or from Google Play
Store.
1. Download the Rooster
directions set up a Rooster
account online at Rooster.com.
2. Check for a confirmation email from Rooster
follow the instructions.
You will need a credit card to establish and maintain your
subscription-based account.
SYSTEM INSTALLATION
1. Install at least one Rooster
equipment or a vehicle, connecting it to a power
supply: 6, 9, or 14 pin ODB; flying lead to power supply
(RED), ground (BLACK) and optional ignition (BLUE).
Or, install at least one Rooster
structure using the optional AC adapter or optional
solar panel. Rooster
ties, wood screws, machine screws, or bolts no larger
than ¼"-20. The Rooster
initializes.
2. Follow the instructions on the Rooster
activation and assignment.
3. Attach at least one Activity Tracker to an Asset you wish
to track. Activity Trackers may be attached with high
bond adhesive tape, a high strength magnet, a flexible
lanyard, or a protective deflector.
4. Follow the instructions on the Rooster
and assign the Activity Trackers to the Assets you wish
® Hubs
to track.
5. Track your assets using the Rooster
WARRANTY INFORMATION (TBD)
ASSET TRACKER QUICK START GUIDE
APP ACCOUNT SET-UP
®
® App to set up your
App and follow the on-screen
®
® account, or setup your
® , and
Hub on a piece of powered
®
® Hub on a building or
Hubs may be mounted using zip
®
Hub will begin blinking as it
®
® App for Hub
® App to Name
App!
®
GENERAL USE AND CARE
• Rooster ® Hubs require unobstructed access to wireless
cellular networks and GPS signals. Optimal Hub
installation requires positioning "logo" side of hub with
clear view of sky.
• Activity Trackers will enter a Sleep mode after a period
of non-use. Movement or activity of an Asset equipped
with a Rooster ® Activity Tracker will awaken the Tracker,
causing it to transmit Asset data to a Rooster
within range.
• If you experience a flashing LED on a Rooster
first call Rooster Tech Support at 1-844-4ROOSTR
®
(1-844-476-6787).
• Use of the Rooster ® Tracking System will not prevent
theft of an Asset
• Use of the Rooster Tracking System may not result in
®
the recovery of lost or stolen Assets
• Keep Rooster Activity Tracker and Hub units clean and
®
sealed. Do not attempt to open the cases of Trackers or
Hubs, or alter or repair any interior components
• Do not submerge Activity Trackers or Rooster
• DO NOT attach the Rooster Hub on or near the
®
following:
» exhaust vents » moving parts
» warning labels » guards
» handrails/holds » switches or controls
» areas exposed to sparks » submerged areas
or high heat
» any other area that may
jeopardize personal safety,
safe operation of machine
or tool, or cause harm to
the device
® Hub
Hub,
®
® Hubs