BELLOTA M18 Manual De Instrucciones página 20

EN
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these
are connected and properly used. Use of dust collection can reduce dust –related hazards.
Power tool use and care
4.
a) Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustment, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow people who is unfamiliar with
the power tool or these instructions operating the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
other conditions that may affect the power tools operation. If damaged, repair the power tool before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories, and tool bits, etc. in accordance with these instructions,
considering the working conditions and the work to be performed. Using the power tool for
operations different from those intended could result in a hazardous situation.
Service
5.
a) Have your power tool serviced by a qualified repair service using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
19