Blackstone 2144 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Set the griddle on its feet� Place the griddle top and hood on
STEP 02
the griddle body by aligning the four (4) pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
Place the two front pins into the
front locking holes and push the
griddle top and hood back� Then,
set the two rear pins into the
Install the two (2) control knobs by pushing them into place
STEP 04
rear holes�
in the oFF position�
06
Use the two (2) M6x16 screws pre-installed in the hood
STEP 03
handle to attach the hood handle grommets and the hood handle to
the front of the hood�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
Place the two front pins into the
front locking holes and push the
griddle top and hood back� Then,
set the two rear pins into the
Hang the grease cup in the slot on the back of the
STEP 05
rear holes�
griddle body�
Model: 2144
BLACKSTONEPRODUCTS.COM/SUPPORT