Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
2. 1 Manual DTV (DVB - T) tuning 1).
1) Press the MENU button, then press the LEFT/RIGHT buttons to select
the CHANNEL menu.
2) Press UP/DOWN buttons to select Manual DTV Tuning and then press
OK button.
3) The DTV Manual Tuning screen will appear. Press the LEFT/RIGHT
buttons to select the desired UHF channel, then press the OK button to
start channel scanning.
When the signal is tuned, the picture and signal strength will be displa-
yed on the screen.
4) Press the MENU button to return to the main menu.
5) Press the EXIT button to exit the menu.
2. 2 Manual DVB-T tuning (DVB-C)
1) Press the MENU button and then press the LEFT/RIGHT buttons to se-
lect the CHANNEL menu.
2) Press UP/DOWN button to select Manual CADTV Tuning and press
the OK button.
2) Press UP/DOWN button to select CADTV Manual Tuning and press OK
button.
3) The CADTV Manual Tuning screen will appear. Press UP/DOWN but-
tons to select (Frequency / Symbol (Ks/S/ QAM Type QAM) and press
OK button to start channel search. When the signal is tuned, the pictu-
re and signal strength will be displayed on the screen.
4) Press the MENU button to return to the main menu.
5) Press the EXIT button to exit the menu.
3.1 Manual ATV Tuning:
You can switch the audio system to scan for analogue TV channels
and tune the channels and then store the selected channels.
NOTE: After manual tuning, press the red teletext button to store it in
the channels.
15
infiniton.es
Publicidad
