Publicidad
Idiomas disponibles
Idiomas disponibles
REAR PANEL
8. ON/OFF switch
9. 24Vdc input connector
10. LINK online interface
11. Chime volume control
12. Microphone volume control
13. Master volume control
14. Tone selector for chime
OPERATION
CONNECTION TO THE AMPLIFIER
Plug an RJ45 cable into either LINK connector (10) and the other side into the REMOTE MIC input of the amplifier.
You can connect another microphone to the other LINK connector via an RJ45 cable.
24Vdc POWER INPUT
Connect the supplied 24Vdc mains adaptor into the 24V DC IN
connector (9) on the rear panel and the other end into a suitable
wall outlet.
POWER ON/OFF
Set the ON/OFF switch (8) on the
rear panel to ON. The POWER LED
(6) on the front panel will light up.
MIC input
Plug the microphone tightly into
the MIC input. Press the TALK but-
ton to activate the paging function.
The LED above the button lights up.
Now you can page every zone in-
dividually or all zones at the same
time. Adjust the volume via the
MIC VOL control (12) on the rear
panel.
Please note: the LED above the TALK button must
be ON, otherwise the paging function will not work.
POWER
24V
2A
ON
OFF
8
9
POWER
LINK
24V
2A
ON
OFF
MIC-4012
MICROPHONE WITH ZONE CONTROL
MIC
OUTPUT LEVEL
-18 -15 -12
-9
-6
-3
0
+3
+6 +9dB
TALK
CHIME
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ALL CALL
POWER
LINK
CHIME VOL.
11
10
POWER
LINK
24V
2A
ON
CHIME VOL.
OFF
CHIME VOL.
MIC VOL.
MASTER VOL.
CHIME
4 TONE
2 TONE
MIC-4012 • 3
CHIME
MIC VOL.
MASTER VOL.
4 TONE
2 TONE
14
12
13
9
CHIME
MIC VOL.
MASTER VOL.
4 TONE
2 TONE
POWER
24V
2A
8
POWER
24V
2A
ON
OFF
1
Publicidad
