STEP 7
1. Screw 2 cam bolts (large-D) into pre-threaded holes on middle connection board (8).
2. Insert 8 wooden dowels (A) into holes on lower left side panel (17), lower right side panel (18) and lower
section top cross bars (15).
3. Turn over middle connection board (8) and attach to pre-assembled lower left side panel (17), lower right side
panel (18) and lower section top cross bars (15) by inserting wood dowels (A) into dowel holes and inserting
cam bolts (large-D) into cam lock holes on the lower left side panel (17), lower right side panel (18) and lower
section top cross bars (15).
4. Insert 2 cam locks (large-E) into cam lock holes on lower left side panel (17) and lower right side panel (18)
and rotate clockwise to secure cam bolts (large-D) in place.