San Jamar SCDGPC13 Hoja De Instrucciones página 4

WEIGHT MEASUREMENTS
1. Press ON/OFF to turn the scale on.
2. Press UNITStochangeunits:Pounds,pounds+ounces,ounces,fluidounces,
kilograms and milliliters.
3. Placeanitemonthescaleinthecenteroftheplatform.
TARE (ADD & WEIGH)
Toignoretheweightofacontainer:
1. Placeacontainerontheplatformbeforeturningthescaleon.
-OR-
1. Turn on the scale, add the container and press TARE.
2. Additemsintothecontainertobeweighed.
Findtheindividualweightofmultipleitemsinonecontainer:
1. Press TAREtoresetthescalebacktozeroweight.
2. Addadditionalitemstobeweighed.
3. Repeatsteps1-2foreachadditionalitem.
Resetthescalebacktozeroweight:
1.  I fnothingisonthescaleanditdoesnotreadzeroweight,pressTARE to
resetthescalebacktozeroweight.
ATTENTION! The scale will tare any amount of weight. Once the total weight actually
on the scale reaches the maximum capacity of 13 pounds (6kg.) the overload warning
code (E) will display.
COUNTING MODE
1. Press UNITStoselectasamplequantity(5,10,25,50pcs)
2. Placeasampleoftheitemstobecountedonthescale.
3. Press ON/OFFtoconfirm.
4. Placeyourtotalquantityontheplatform.Displaywillshowthetotalquantity.
PERCENTAGE WEIGHING
1. Press UNITSuntilyousee"100.0%"onthedisplay.
2. Placeobjectontheplatform.
3. Press ON/OFFtoconfirm.
4. Removeobjectandreplacewithanewobjecttobeweighed.
5.  O bject'sweightpercentageascomparedtotheoriginalobject'sweight
willdisplay.
4