PPA TOMADA 10A SMART Manual

WARNING:
Do not use the equipment
without referring to this
manual rst.
MANUAL
TOMADA 10A
SMART
P30400 - 02/2023
Rev. 1
The 10A Smart Socket makes it easy to turn your conven onal sockets into smart
sockets. All it takes is a SIMPLE CONFIGURATION to add it to your internet, and
right a er you can turn it on and off, measure energy consump on and create
rou nes for your electronic equipment.
The PPA ON app will help you do all this, and with the help of assistants
and voice (Alexa or Google Home) it becomes easier and more interac ve.
Model
Supply voltage
Nominal chain
Max power consumption
Wi-Fi
Wi-Fi Range
PPA ON compatible systems
Operating Temperature
Product Dimension (WxHxD)
Product weight
Introduc on to the applica on:
Step 1: To download the "PPA ON" applica on, go to the Google Paly Store or
the Apple Store.
NOTE: The applica on is not available for Windows Phone (Microso )
opera ng system and other opera ng systems on the market, except the two
men oned above.
A er installing the applica on, follow the steps:
Step 2: Log in if you already have an account, if you do not register in the App,
entering informa on such as: Country and e-mail, a er entering the data click
on Get verifica on code.
Click Register soon
a er accep ng the
terms
Login with an existing account
Register
A er clicking on
obtain the
Register
verifica on code it
will be requested.
Brazil
seu email@seuemail.com Your email@youremail.com
Obtain the verifica on code
Registry verifica on code
495XXX
to verify your registra on account
it is in the email
informed
Set password
a er entering the code the App will
Use 6 to 20 characters, mixing le ers and numbers
ask for register one password.
Concluded
Step 3: Add a device, for this and turn off mobile data connect your
Smartphone to the WiFi network that the device will be connected to. Turn on
Bluetooth, turn on device loca on click '+' in the upper right corner.
Cancel
Restart device first
Turn on the device.
Turn off a er 10s and turn on again
Google Home
Back
Make sure your device is reset and in EZ Mode (LED flashing quickly / 2 mes
per second). If not, press and hold the reset bu on un l the LED flashes
quickly.
Step 4: Enter the WiFi network and password the device will connect to.
Click next.
Cancel
A408003
Select a 2.4GHz Wi-Fi network
and enter the password.
If your Wi-Fi is 5GHz, set it to 2.4GHz
100 ~ 240 V | 50/60 Hz
before proceeding. Common Router
Configura on Method
10 a
3200W
Products_2.4GHz
IEEE 802.11b/g/n 2,4 GHz ,
productscx2
30 m without obstacles
Next
iOS , Android
-15 a 40 °C
Cancel
75× 40× 75 mm
Successfully added
98 g
TOMADA 10A
Device successfully added.
TOMADA 10A SMART
Device informa on
Instant Scene and Operator
Third-Party Support and Control
Device Offline No fica on
Offline No fica on
Others
Device sharing
Create group
Device update
Remove device
User Agreement and Privacy Policy
We understand the importance of
privacy. In order to fully present our
collection and use of your personal
information, we have thoroughly
reviewed our privacy policy and user
ATTENTION !! IF THE DEVICE REGISTRATION PROCEDURE THROUGH THE
agreement in accordance with the
latest laws and regulations. By clicking
EZ MODE IS NOT SUCCESSFULLY CARRIED OUT, IT WILL BE NECESSARY TO
[Agree], it means that you have read,
understood and accepted the entire REGISTER THROUGH THE AP MODE.
updated Privacy Policy and User
Agreement. Please take some time to
familiarize yourself with our privacy
Step 5: Enter add device again. Enter the Wi-Fi network and password the
Not accepted Accepted device will connect.
Click next.
Cancel
Enter the
authen ca on code
The verifica on code has been sent to
your email address:
brenosouzasilva099@gmail.com Resend (51s)
Make sure your device is reset, to enter AP Mode (LED flashing slowly 1 me
per second), tap EZ Mode in the app to change the mode. If not reset, press
and hold the reset bu on un l the LED flashes slowly.
Cancel
Restart device
Turn on the device.
Turn off a er 10s and turn on again
Back
Add Manually
Universal Smart Alarm
Smart
Control
Smart Electrifier
IP HD câmera
No device
Light switch Wi-fi plug
EZ Mode
Cancel
Restart device first
If the indicator is flashing quickly, skip the reset step.
1 On
2 Press the PROG bu on for 5 seconds
3 Make sure the indicator light is flashing quickly.
If the indicator is
flashing quickly,
skip the reset step.
1 On
2 Press the RESET bu on (toggle) for 5
seconds (subject to instruc ons)
3 Make sure the indicator light is flashing
quickly
Next
Next
Cancel Cancel
Add Device Add Device
Make sure the Wi-Fi signal is stable Make sure the Wi-Fi signal is stable
Register the Register the
Analyze Start the Analyze
the devices device on
device the devices
the Cloud
TOMADA 10A SMART
Edit (inf. and conf.
Concluded Cloudy
general)
Temp. outdoor Humidity outdoor Pressure
All Devices
Living Room
TOMADA 10A...
My Page Inteligent Me
Changing the Device Name
To rename the device, tap it, then Edit
, in sequence
Share device with other users
«Share device» and «Add share number»
or «email»
Add Share
Share device
2
Add a new family member to be able to share all smart
Country/ region Brazil devices and scenarios. Familiar se ngs
Account
number
Device shared exclusively with the following users
1
Email
Is the latest version
Remove device just click and go
Cancel
Select a 2.4GHz Wi-Fi network Select a 2.4GHz Wi-Fi network
and enter the password. and enter the password.
If your Wi-Fi is 5GHz, set it to 2.4GHz If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router before proceeding. Common Router
Configura on Method Configura on Method
Password
Next Next
Cancel
EZ Mode Cancel AP Mode
Restart device
Restart device
Confirm that the indicator is flashing slowly.
Press the bo on RESET for 5s.
Then proceed to the next step.
Next Back
Back Next
A er connec ng to the Lamp, the App will ask you to login to the local network
(Smartlife-XXXX) that it will make available, a er connec ng to the local network,
go back to the applica on to con nue the switch registra on.
Smart Relay
Module
Cancel AP Mode
Restart device
PPA Connect
Lamp Press the bo on RESET for 5s again
un l the indicator flash slowly
Check if the indicator is flashing slowly.
Next
Back
Your device has been successfully added, then tap Done
Modo EZ
Cancel
Concluded
Successfully added
LAMP...
Device added successfully
WARNING: This equipment is not entitled to protection
against harmful interference and may not cause interference
to duly authorized systems.
For more information consult the anatel website:
www.gov.br/anatel/pt-br
GENERAL TERMS AND CONDITIONS OF WARRANTY
Motoppar da Amazônia Indústria e Comércio de Eletrônicos Ltda.,
registered with the CNPJ (National Registry of Legal Entities) under
Number 09.084.119/0001-64, located at Av. Açaí nº 875, Distrito
Start the
device on Industrial I, Manaus/AM, CEP 69075-904, Brasil, manufacturer of
device
the Cloud
PPA Products, hereby guarantees this product against design,
manufacturing or assembly defects and/or supportively as a result of
material quality flaws that could make its intended use improper or
inadequate, within a legal period of ninety days from time of
acquisition, provided that the installation instructions described in
the instruction manual are observed.
Due to the credibility and trust placed on PPA products, we will add
275 more days to the period mentioned above, reaching a warranty
period of one year, likewise counted from the time of acquisition
proven by consumer through proof of purchase (Customer Receipt).
In case of defect, within the warranty period, PPA responsibilities are
restricted to the repair or substitution of the product manufactured by
the company, under the following conditions:
1. The repair and readjustment of the equipment can only be
carried out by the Technical Assistance, which is qualified to
open, remove, replace parts or components, as well as repair
the defects covered by the warranty, and, in the absence of this
and any use of parts not originals contained in the use, will
result in the waiver of this term by the consumer;
2. The warranty will not extend to accessories such as cables,
screws kit, fixing brackets, sources, etc.;
3. Expenses for packaging, transport and reinstallation of the
product are exclusively borne by the consumer;
4. The equipment must be sent directly to the company
responsible for the sale, representative of the manufacturer,
through the address on the purchase invoice, properly
packaged, thus avoiding the loss of warranty;
5. The replacement or repair of the equipment does not extend
the warranty period.
This warranty will be void if the product:
1. Suffer damages caused by agents of nature, such as
atmospheric discharges, floods, fires, landslides, etc.;
2. It is installed in an improper electrical network or even in
disagreement with any of the installation instructions set out in
the manual;
3. Defects caused by falls, blows or any other physical accident;
4. For violation of the equipment or attempt to repair by
unauthorized personnel;
5. It is not used for its intended purpose;
6. Not used under normal conditions;
7. Suffer damage caused by accessories or equipment attached
to the product.
Recommendation:
We recommend the installation and maintenance of the product by a
specialized technical service.
If the product has a defect or abnormal operation, look for a
specialized Technical Service for the necessary corrections.
Motoppar da Amazônia Indústria e Comércio de Eletrônicos Ltda.
Avenida Açaí, 875 - Distrito Industrial I
Manaus - AM - CEP 69075-904 - Brasil
www.ppa.com.br | +55 14 3407 1000
AP Mode
Next
Cancel
Conect the telefone Wi-Fi to
Ac ve
hotspot device
1. Telephone conected access point showing below
Atual network
Avalible network
2. Retorn to the app and con nue add devices
Connect now
Imported by:
CNPJ: 09.084.119/0001-64