Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Cleaning
•
Always disconnect the fan from the Electrical Outlet before servicing and cleaning.
•
This product has been lubricated since fabrication and requires no additional lubrication. Additional lubrica-
tion increases the risk of fire, electrical shock and injury to persons and/or property.
•
To clean use a damp cloth on the outside of the appliance. Dry thoroughly before plugging in again and
operation. Only dampen with water, do not use any other liquid.
Operation Instructions
Only connect the power outlet to a power source with 120 to 127 V
1.
Remove the Air Circulator from the carton.
2.
Place the Air Circulator on a flat, leveled surface.
3.
To reposition the airflow direction, loosen the positioning knobs on each side of the grill and tilt in the de-
sired position. Tighten the knobs to fix the position. Always do this while the fan is OFF.
4.
Before operating this appliance, first make sure the speed selector is place in 0 or OFF position then
Connect the power outlet to a power source that supplies 120-127 V~, 60 Hz. Make sure that the plug fits
perfectly into the power outlet and that no metal part is exposed.
5.
To turn on, use the speed dial to select the desired speed:
1
Low
2
Medium
3
High
6.
To turn off, turn the Speed Selector and select 0.
Positioning knobs
Be sure that the plugs fits tightly into the outlet. A loose fit between outlet and plug may cause
overheating and/or fire which may lead to personal injury or property damage.
Wallmount
•
This fan should be mounted on a vertical, flat, and structurally
solid surface capable of supporting the fan. The user must
make sure that the suitable tools and hardware are used.
•
Suitable mounting anchors must be used to mount the fan on
the wall.
•
When mounting the fan to the wall, make sure the cable
pases between the rear body of the and and the base.
Night / Sleep Mode
Fresh Breeze
High Air Circulation
Speed dial
WARNING
Base
Head
CPTIM0006 R01
Publicidad
