SMA Solar Technology SSM-U-FOPB Manual página 19

SMA Solar Technology AG
2.2 Safety Information
Danger to life from electric shock due to live voltage
High voltages are present in the live components of the DC subdistribution. Touching live
components results in death or serious injury due to electric shock.
• Wear suitable personal protective equipment for all work on the product.
• Do not touch any live components.
• Unless live voltage is absolutely necessary, always disconnect all DC subdistributions and
the DC side of the inverter prior to performing any work on the DC subdistribution (see
manuals of the DC subdistribution and the inverter). Always observe the five safety rules.
Damage to eyes and skin due to visible and invisible laser radiation
The product contains class 1 LED or laser components in accordance with IEC 60825-1 (2003).
The laser beam appears at the end of the optical fiber. Incorrect handling with laser beams can
result in damage to eyes and skin.
• Do not look into the laser beam.
• Do not look at the laser beam using optical instruments.
• Do not point the laser beam at persons.
3 Scope of Delivery
Check the scope of delivery for completeness and any externally visible damage. Contact your
distributor if the scope of delivery is incomplete or damaged.
Optical Fiber Interface Module
Figure 5 : Components included in the scope of delivery of the optical fiber interface module
Position Quantity
A 1
B 1
Installation Manual
Designation
Interface module for optical fiber communication
Installation Manual
3 Scope of Delivery
SSMLWL-IA-xx-11 19