NORAUTO COMPACT Manual De Instrucciones página 25

• Ensure that the dust container, filter, and accessories are fully dry before reusing them
again or before storing them when not in use.
• Store the appliance and its connector supply cord in a cool, dry place, protected from
moisture and direct sunlight.
EMPTYING DUST CONTAINER, CLEANING FILTER
1. Press the release button to remove the dust container.
2. Hold the dust container over a dust-bin. Carefully remove the filter and empty the dust
container.
3. If required, clean the dust container with a damp cloth. Let it dry completely before
assembly.
NOTE: It is advisable to empty the dust container after each use. Dust container requires
regular cleaning.
4. Tap the filter gently.
5. Occasionally wash the filter under cold running water. Let it dry completely before fitting
back into the unit.
TECHNICAL DATA
Connection voltage
Operating current
Max. power consumption
Max. vacuum rate
Operating temperature
This product meets all the basic EU regulatory requirements relevant to it.
Selective collection of waste electrical and electronic equipment. Electrical
equipment must not be disposed of with household waste. Pursuant
to European Directive 2012/19/EU on waste electrical and electronic
equipment, and its transposition into national law, waste electrical
equipment must be collected separately and disposed of in designated
collection points. Contact the local authorities or the vendor for advice on
recycling.
12 V Dust container capacity
7 A Length of supply cord
100 W Overall dimensions
5500 Pa Materials
0ºC to +40ºC
EN
0.5 l
4 meters
33 x 10 x 14 cm
ABS, PC
25