IMPORTANT
Before using the product, read this manual carefully to avoid any malfunction.
The information presented serves only as a reference on the product; Due to updates there may be differences.
Check our website www.steren.com for the latest version of this manual.
CAUTIONS
• This device is not intended for use by persons (including children) whose physical, sensory or mental abilities
are different or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not place heavy objects on the extender.
• Do not use or store the product in places where there are leaks or splashes.
• Use a soft and dry cloth to clean it.
PARTS
RECEIVER
CONNECTION AND OPERATING
1
Connect the transmitter to the HDMI input of the device (DVD, PS3, etc.).
2
Connect the network cable (not included) to the corresponding inputs of the transmitter and the receiver.
3
Connect the receiver to the HDMI input of the TV.
TRANSMITTER
TROUBLESHOOTING
TROUBLES
• Can not see anything on the screen
• The image is intermittent
SPECIFICATIONS
Supported resolution: 480i/576i/480p/576p/720p/1 080i/1 080p/4k/2k
Operating temperature: 0 to 70°
RH: 10% to 85% non-condensing
Supported audio format: DTS-HD Master Audio, Dolby true-HD
RX
Network cable
input
HDMI connector
SOLUTIONS
• Connect the transmitter to the HDMI input of the device (DVD,
PS3, etc.).
• Make sure there is an output signal for the television.
• Reconnect the transmitter to the signal source and the receiver
to the HDMI input of the screen.
• The extender reaches 30 meters in 720p resolution. Please
make sure that there is no more than 30 meters distance
between the video source and the screen. Also, verify that the
output resolution of the source corresponds to 720p.
30 m HDMI passive extender
Instruction manual
TRANSMITTER
Do not use a network cable of
more than 30 meters
208-105
V1.0
0119m
TX
Network cable
input
HDMI connector
RECEIVER
Specifications may vary
without previous notice.