Caution:
The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
Power switch
The On/Off power switch has three different positions.
Press one time on the switch button to turn the vacuum ON. And in low speed.
Press two times on the switch button to run the vacuum in high speed .
Press three times on the switch button to turn the vacuum OFF.
Cleaning & Changing the Dust Cup Filter
Changing and Cleaning the Dust Cup Filter
In order to achieve the best performance, empty the dust cup container and clean the dust cup filter after each
use.
Important Note:
DO NOT use a washing machine to clean the dust cup filter. Do not use a hair dryer to dry it.
AIR DRY ONLY.
Rinse the dust cup filter in cold water, and then let it air dry for 24 hours before replacing it back in the dust cup
3.
container.
Operating Instructions
Page 15 of 28