Inglesina Fast Manual De Instrucciones página 13

HOW TO POSITION THE CHAIR
Place the chair close to the table and
1
lean its support arms A on the table
edge.
Screw the clamps B by rotating them
2
counter-clockwise till reaching the
table thickness.
3
RESTRAINT SYSTEM
Always secure the baby using the
4
belly belt C hooking the central buckle
D to the leg dividing element.
Fasten the protection element E using
5
the buttons.
To adjust the belly belt C, act on the
6
adjustment elements as shown in
HOW TO UNHOOK THE CHAIR AND
FOLD IT UP
Unhook the restraint system and
7
remove the baby from the chair,
verifying that the feet of the baby are
free from the hook-on chair arms
Loosen the camps by rotating them
8
clockwise; then, extract the chair by
pulling it towards outside.
Fold up the two arms A towards the
9
inner side.
HOW TO REMOVE THE LINING
Release the buttons at the ends of the
10
lining and free both arms A.
Note: Reassemble the safety strings
letting them slide always outside the
metal pipes of the arms A and fasten
them with the buttons
Push the blocking pins F of the chair
11
arm upwards and simultaneously
extract the two arms by pulling them
towards outside.
INSTRUCTIONS
12
13
14
15
Extract the plastic rings of the
restraint system from the ends of the
arms A.
Then, extract the chair support pipe F
from the lining.
Extract the rigid support from the
bottom. To wash the lining, follow the
instructions born on the labels present
on the fabric itself.
The chair is equipped with a
convenient integrated transport bag.
EN
13