Publicidad
Idiomas disponibles
Idiomas disponibles
Empty used fluid tank
Make sure that the two hoses marked with "TO TRANSMIS-
SION" are not connected to the vehicle.
Open the handle valve on the fluid hose marked with
"EMPTY".
Place the hose into a container.
The system will show the empty new tank interface and
automatically start fluid draining operation.
The unit will drain fluid until the hose marked with "EMPTY"
has no fluid.
You can press the RETURN key to stop the draining operation.
System setting
Select system setting item in main menu and press ENTER.
In the next menu, select the item you need to configure.
- Sensor calibration
- Transmission fluid selection
- Window backlight
- LCD brightness
- Date and time
- Language selection
- Vehicle adding
- Print setting
- History records
- Equipment information
Sensor calibration
Select the sensor calibration you want to calibrate.
New fuel tank sensor
Select "New fuel tank sensor" and press ENTER.
To perform this calibration, you will need an object with a
known weight.
Input the weight of the object you will use as a reference and
press ENTER.
Open the door of the machine and take out the new oil tank.
Once you have taken out the tank, press ENTER.
· 22 ·
REF.54290
Publicidad
