SOLAC Yuna Manual De Instrucciones página 5

ESPAÑOL ENGLISH
DESCRIPTION
A Handle
B On/Off switch
C Base
D Cable housing
E Water level sight
F Body
G Filter
H Lid
I Lid open button
USE AND CARE:
Do not switch the appliance on without water.
•
Do not use the appliance if the on/off switch
•
does not work.
Do not move the appliance while in use.
•
Use the appliance handle/s, to catch it or move it.
•
Respect the MAX and MIN levels.
•
Choose adequate sentence/s depeding of pro-
•
duct:
Disconnect the appliance from the mains when
•
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
•
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Do not store the appliance if it is still hot.
•
Only use water with the appliance.
•
The appliance is only intended for heating wa-
•
ter; as a consequence the appliance should
not be used for the cooking or heating of milk...
The use of bottled mineral water adapted for
•
human consumption is recommended.
Never leave the appliance unattended while in
•
use.
Never leave the appliance connected and una-
•
ttended if is not in use. This saves energy and
prolongs the life of the appliance.
Take care when handling recipients containing
•
liquids heated in this appliance as they may
boil fiercely.
CAUTION: Water condensation may appear
•
on the surfaces and objects around this
appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
Remove the appliance's protective film.
•
Before using the product for the first time it is
•
advisable to boil water within, so as to remove
all remaining dust and impurities.
FILLING WITH WATER:
You must fill the water compartment before tur-
•
ning on the appliance.
Extract the receptacle from its place.
•
Open the cover.
•
Open the lid by pressing the opening button.
•
Fill the receptacle taking care to observe the
•
MAX and MIN level (Fig.1).
Close the lid.
•
Put the container back onto its place.
•
USE:
Take the length of cable required out of the
•
housing.
Attach the appliance to its base / connector
•
making sure that it is correctly fitted into place.
Connect the appliance to the mains.
•
Turn the appliance on, by using the on/off
•
switch.
Once the water has boiled the appliance will
•
switch off automatically.
The appliance can be switched on again using
•
the switch once the control device has cooled,
if it is not switched on again, do not force it,
allow it to cool.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
•
Put the cable back in the cable housing.
•
The cable housing means you can remove and
•
have available the required length of cable for
working with the appliance, preventing acci-
dent risk situations.
Remove the water from the inside of the
•
appliance.
Clean the appliance.
•
(Original instructions)
EN ES