Cycplus M2 Manual De Usuario página 8

05.Temperature unit setting（C6)
Long pres [R1 button
1
then press [R1 button
*The screen displays C6 and the '°C' is flashing.
Press [L1 button
2
*'°C' stops flashing.
Press [R1 button
3
Long press [R1 button
4
06.Factory reset（C7）
Long pres [R1 button
1
then press [R1 button
*The screen displays C7 and RECOVER is flashing.
Press [L1 button
2
* 'RECOVER' stops flashing.
Long press [L2 button
3
and the computer will turn off.
07.Odograph setting（C8)
Long press [R1 button
1
then press [R1 button
*The screen displays C8, ODO and the below 5 digits flash.
Press [L1 button
2
*Setable digit will be flashing continuously.
Press [R1 button
3
Press [L2 button
4
Press [L1 button
5
Long press [R1 button
6
] to enter the setting，
] quartic.
] to start setting.
] to switch between Celsius and Fahrenheit .
] to return to the main page.
] to enter the setting,
] quintic.
] to start setting.
] to restore factory settings,
] to enter the setting,
] six times.
] to start setting.
] to modify the digit.
] to switch the setable digit.
] to finish setting.
] to return to the main page.
07