CORDED MULTI-CYCLONIC VACUUM CLEANER
10
Please read this manual carefully before use.
• After unpacking, please install the wall mount. Install
the vacuum cleaner on the wall mount according to
the Fig. 2;
• When using the vacuum cleaner, please be careful
not to block the suction inlet, otherwise it may cause
motor overheating; when the brush suction nozzle is
blocked, please stop the machine to clean the floor
brush, and then restart the machine;
• Please regularly clean the dust in the dust cup, in the
filter frame and in the HEPA filter. When rinsing the
dust cup and the filter frame with water, please dry
them before installing into the vacuum cleaner. The
HEPA filter cannot be washed with water;
• Please do not use the vacuum cleaner to collect
detergent, grease, glass slag, construction and
decoration waste, needles, wet dust, combustibles,
matches and other inflammables and water melt
• Please do not pour or splash water or other liquids
on the machine to avoid short circuits or fire and to
prevent irreparably damage;
• When cleaning the vacuum cleaner, cut off the
power supply and wipe it with a dry cloth. Do not use
corrosive and turbid liquids such as gasoline and
banana water;
• The vacuum cleaner shall be stored in a dry place
away from light, fire and other heat sources;
• Do not let children use or play with the machine;
• When the vacuum cleaner fails to work or the power