Arregui AL011 Manual De Instrucciones página 16

AL011
Refer to the image and note that the 4 alarms are named A, B, C and D,
and the 2 remote controls are a and b. The remote control only controls
the door sensors that have been paired
with it. Thus, you can connect alarms
A, B and C with remote control "a", and
alarms C and D with remote control "b".
Remote controls "a" and "b" control alarm
C without interfering with each other.
User manual
Activating the alarm:
the door closed. Once activated, if the door opens, the alarm will sound for 30
seconds.
Deactivating the alarm:
function will remain active even if disconnected.
SOS function:
for 30 seconds.
Function button
Function 1: Ding-dong
(doorbell) 
))
Press once .To repeat
this function:
To move to the next func-
tion, press again
Troubleshooting
If the alarm does not detect the magnetic sensor when
the alarm, it will emit around 10 beeps. Adjust the distance between the sensor
and alarm to fix the problem.
16
Press the button
Press the button
If the SOS button is pressed in any situation, the alarm will sound
: With the alarm disconnected
Function 2:
door opened alarm.
the door is opened, a
> high-pitched alarm will
sound, which will cease
when the door is closed.
.
To repeat this function:
>
the next function, press
again .
A
on your remote control, always with
on the remote control. The SOS
High-pitched
If
> . To move to
B C
a
:
Function 3: Beeping
door opened alarm.
door is opened, 2 tones
(3 beeps per tone) will
sound, which will cease
when the door is closed.
To repeat this function:
> . To go back to
function 1, press again .
is pressed to activate
En
D
b
If the