Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TURNING THE HOOD ON FOR THE FIRST TIME:
When the extraction hood is connected to the mains, the screen automatically turns on and
the language, date, time and type of filter used can be set. To confirm each setting, press the
arrow on the right-hand side of the screen. Any values that are not defined by the user will be
set to default.
Choosing the type of filter:
If the installation has extraction to the outside, select the icon on the left-hand side of the
screen (10).
If the installation is the re-cycling version, select the icon on the right-hand side of the screen
(11), then choose between the normal or washable carbon filter.
20:00
Filter Settings
Maintenance Notification
10
11
TURNING THE SCREEN ON:
Press the main button (1). The controls for the extractor fan and the light will appear. On the
right-hand side of the screen, the side bar will appear with various options (Pause, Air Renova-
tion, Timer, Audible alarm, Settings).
TURNING THE HOOD OFF:
When the hood is turned on, press the main button (1) to turn it off at any point. If the "Hiber-
nation Mode" is activated, the hibernation screen will appear. If it is deactivated, the screen
will enter "Total Turn Off" mode and turn black. The extractor fan and the light will turn off
automatically.
WORKING THE EXTRACTOR FAN:
Once the screen is turned on, the controls for the extractor fan and the light will appear au-
tomatically. Turn the extractor fan on by pressing the fan icon (2). You can adjust the desired
power level (levels: SILENT + from 1 to 4 + TURBO) by sliding your finger up and down. Pressing
the SILENT / TURBO buttons adjusts the level directly.
WORKING THE LIGHT:
Once the screen is turned on, the controls for the extractor fan and the light will appear auto-
matically. Turn the light on by pressing the light icon (3). You can adjust the desired power level
(levels: MIN + from 1 to 3 + MAX) by sliding your finger up and down. Pressing the MIN/MAX
35
Publicidad
