Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Channel:
Choose the channel you want to configure
Compression:
H.265 standard compression
Resolution:
D1 / 1080N
Frame Rate:
1 to 25fps
Bit Rate Type:
you can choose limited flow or variable flow. When choosing variable flow, you
have 6 image quality options
Bit Rate:
the higher the value of the flow, the better the image quality
Video / Audio:
Select the recording type
1.3 Network
Net Card:
Select the Wire Netcard option
DHCP:
Get the IP address automatically.
IP address:
set the IP address manualy. The default address is 192.168.0.77
Subnet mask:
The default address is: 255.255.255.0
Gateway:
The default address is 192.168.0.1
DNS setup:
The domain name of the server converts the domain name into the IP address. The
IP address is provided by the network administrator. This address must then be set to restart the
system to operate.
Media port:
default 34567
HTTP port:
default 80
HS download
Transfer policy:
choose self-adaptation, quality priority or flow continuity priority.
The data flow will be calibrated according to the settings. The self-adaptation strategy represents
the trade-off between image quality vs. fluency of images. Image fluency and auto-adaptation
options are only valid when the data stream wizard is activated. Otherwise, the quality of the
images will prevail.
6
Publicidad
Tabla de contenido
