iOttie Easy One Touch Wireless 2 Manual Del Usuario página 4

Qi Alignment Guide
The Qi receiver coil is usually located in the center area of the phone.
Check with your phone's manufacturer for Qi coil location. Below are
some examples for commonly used phones.
For optimal wireless charging, please make sure your smartphone and
mount's Qi coils are aligned.
Adjusting the Mount
Cradle knob
When switching between landscape
and portrait mode, loosen the cradle
knob to rotate the cradle. Tighten
the knob to lock the mount into your
desired position.
Telescopic knob
Located on top of the telescopic
arm, the knob can be loosened to
extend the arm and tightened to
secure the arm in place.
Foot release button
The foot can be adjusted to
3 different height settings to
accommodate different phone
sizes. Once setup is chosen, the
foot is designed to align with
the center of the side arms for
optimal Qi wireless charging.
260°
Pivot knob
Located on the side of the mount
base, you can loosen the pivot
knob to move the telescopic arm
up or down. Tighten the knob to
lock the arm into position.