Audizio 102.502 Manual De Instrucciones página 6

• Remove the radio from the package box.
• Plug in the power adapter and press [Power].
Caution: Use only the adapter supplied with the radio. Connecting a power supply with a different rating can cause
permanent damage to the radio and may be hazardous.
Note: Make sure to fully extend the antenna (located at the back of the unit) to ensure the best possible FM and DAB
reception.
If there is Digital Audio Broadcasting (DAB) in your area, the Radio can pick up the DAB stations as well. The radio supports
both DAB and DAB+. Place the radio close to the window and extend the antenna as far as it can go to get the best reception.
Sometimes you may need to adjust the direction of the antenna to improve reception.
Press [Source] to select DAB mode. The first time DAB mode is selected, the unit will automatically search for available
stations.
Auto scan: In DAB-mode, press and hold [Menu/Info]. Press [Volume +/>] or [Volume -/<] to select 'FULL Scan' and press
[Snooze / Station / Select] to confirm. The number of found stations will be displayed during the automatic scan.
When finished, the device will tune into the last listened to station.
Station presetting: While playing in DAB mode, press and hold [Preset]. Press [Volume +/>] or [Volume -/<] to select the
desired preset slot (1-30), press [Snooze / Station / Select] to store.
Press [Preset] to recall memory. Press [Volume +/>] or [Volume -/<] to select the stored station you want to listen to. Press
[Snooze / Station / Select] to confirm.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is
being played.
To receive the ordinary FM stations, place the radio close to a window and extend the antenna as far as it can go to get the
best reception. You may need to adjust the direction of the antenna to improve reception.
Press [Source] to select FM mode.
Auto scan: Press [Snooze / Station / Select], "<" and ">" are shown on the display. Press and hold [Volume +/>] or [Volume -
/<], the device will start scanning for the next strong station automatically.
Manual scan: Press [Snooze / Station / Select], "<" and ">" are shown on the display. Press [Volume +/>] or [Volume -/<] to
scroll the frequency value.
Station presetting: While playing in FM mode, press and hold [Preset]. Press [Volume +/>] or [Volume -/<] to select the
desired preset slot (1-30), press [Snooze / Station / Select] to store.
Press [Preset] to recall memory. Press [Volume +/>] or [Volume -/<] to select the stored station you want to listen to. Press
[Snooze / Station / Select] to confirm.
Show channel information: Press [Menu/Info] repeatedly to show various forms of information regarding the station that is
being played.
Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called
"pairing". The radio is served as a receiver, to receive the music stream to be played on the radio.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in
range and BT operation has been selected on the radio. "Pairing" does not have to be repeated. This function may need to be
activated in your BT device, however.
• Press [Source] to enter BT mode.
• Turn on BT streaming on your device. The device will scan for pairable BT devices in the reception range.
• Select "Audizio Cuneo" from the list with found devices. Enter "0000" if a pass code is required.
• Start playback on your BT device. Playback now takes place emitting sound from the radio.
Setting an alarm will switch the radio on (if in standby mode) and tune into a DAB- or an FM radio station or sound a buzzer-
type tone. To set an alarm:
• Press [Alarm1] or [Alarm2].
• Press [Volume +/>] or [Volume -/<] to set the hour value for the alarm and press [Snooze / Station / Select] to confirm.
• Press [Volume +/>] or [Volume -/<] to set the minute value for the alarm and press [Snooze / Station / Select] to confirm.
• Press [Volume +/>] or [Volume -/<] to set the duration of the alarm (in minutes) and press [Snooze / Station / Select] to
confirm.
• Press [Volume +/>] or [Volume -/<] to select Buzzer, DAB or FM and press [Snooze / Station / Select] to confirm.
6