Profile 545144123 Manual De Instrucciones página 34

545144123
TURNING THE DEVICE ON AND OFF:
Press POWER to turn on the device. Press the MODE button to select the desired operating mode.
Press POWER again to turn the device off.
MODES:
The unit has four modes: cooling, dehumidifier, ventilation, sleep.
COOLING:
1. Select the cool mode to lower the temperature in the room.
2. Press the MODE button repeatedly until the COOL mode LED lights up.
3. Press the UP/DOWN button to set the temperature displayed on the screen. The temperature
can be set between 16℃ and 32℃.
4. Press the SPEED button repeatedly until the desired fan speed indicator lights up.
5. Druk op de SWING-knop om de richting van de luchtstroom te controleren.
Note: The air conditioner stops operating when the room temperature is lower than the selected
temperature.
VENTILATION:
Press the MODE button repeatedly until the FAN indicator lights up. In ventilation mode, the room air
is circulated but not cooled.
Press the SPEED button repeatedly until the desired ventilation speed is reached.
DEHUMIDIFYING:
Press the MODE button until the DRY mode LED lights up.
Caution: In this mode, the fan will automatically switch to low speed. The user must have the hose
connected to the drain opening on the bottom of the unit.
SLEEP MODE:
Caution: The sleep mode can only be activated in COOL (cooling) mode.
When the unit is in COOL mode:
After 1 hour, the set temperature is increased by 1℃, after another hour, the set temperature is
increased by 1℃ again.
TIMER:
The timer can be operated in two ways.
To turn off the unit:
Press the timer button to turn on the timer function. Press UP/DOWN repeatedly to set the duration
time.
To turn the device on:
Press the timer button to turn on the timer function. Press UP/DOWN repeatedly to set the duration
time.
Portable Airco 12 000BTU EN
6