Descargar Imprimir esta página

Yuwell YE660D Guia Del Usuario página 82

Ocultar thumbs Ver también para YE660D:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Electromagnetic compatibility information
There is the potentia
interference
between
devices. If there is, please find out the problems
and take the following measures:
(1) Turn off the device, and turn on again.
(2) Change the direction of the device.
(3)Keep the product away from the interferential
devices.
Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture s declaration- electromagnetic emission
'
The YE660D is int ended for use in t he elect romagnet ic environment
specified below
The customer or the user of the YE660D
.
should assure that it is used in such and environment
Emission test
RF emissions
CISPR 11
Group 1
RF emissions
CISPR 11
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
risk of radio frequency
the
device and other
.
Compliance
Group1
Class B
Class A
Complies
152
Electromagnetic compatibility information
Table 2
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture s declaration-electromagnetic emission
'
The
YE660D
is intended
environment specified below
YE660D should assure that it is used in such and environment
Immunity
IEC 60601
test
test level
Electrostatic
discharge
±8 kV contact
(ESD)
IEC
±15 kV air
61000-4-2
Electrical
±2 kV
fasttransient
100kHz repetition
/burst IEC
frequency
61000-4-4
Surge
IEC
±1 kV line(s)to line(s)
61000-4-5
±2 kV line(s)to earth
Voltage dips,
<5 % UT (>95 % dip in UT)
short
for 0.5 cycle
interruptions
40 % UT (60 % dip in UT)
and voltage
for 5 cycles
variations on
70 % UT (30 % dip in UT)
power supply
for 25 cycles
input l ines IEC
<5 % UT (>95 % dip in UT)
61000-4-11
for 5 s
Power
frequency
(50/60 Hz)
30A/m
magnetic
50Hz or 60Hz
field IEC
61000-4-8
NOTE: UT is the a.c. mains voltage prior to application of the test level.
for use in the electromagnetic
The customer or the user of the
.
Compliance
level
±8 kV contact
±15 kV air
±2 kV
100kHz repetition
frequency
±1 kV line(s)to line(s)
<5 % UT (>95 % dip in UT)
for 0.5 cycle
40 % UT (60 % dip in UT)
for 5 cycles
70 % UT (30 % dip in UT)
for 25 cycles
<5 % UT (>95 % dip in UT)
for 5 s
30A/m
50Hz or 60Hz
153
.

Publicidad

loading