cosihome CH-HP03G Manual De Instrucciones página 5

CONTROLLER
-
1. LCD Display
2. Temperature setting indicator
3. On/Off button
4. Temperature setting button
These images are for reference only,
please refer to your product.
If you find you're missing any parts from
your order, please contact our customer
care team by emailing help@cosihome.
com for fast and friendly help.
OPERATING INSTRUCTIONS
-
Turning on Turning on
1. 1. Insert connector two into connector Insert connector two into connector
one one
2. 2. Plug the power cable into a power Plug the power cable into a power
socket. socket.
3. 3. Ensure the power socket is turned on. Ensure the power socket is turned on.
4. 4. Press and hold the on/off button for Press and hold the on/off button for
three seconds. three seconds.
5. 5. The heated pad will turn on and The heated pad will turn on and
the temperature setting indicator the temperature setting indicator
number will illuminate on the number will illuminate on the
controller's LCD display. controller's LCD display.
6. 6. The heated pad will turn on in heat The heated pad will turn on in heat
level 3. level 3.
8 of 62 | English
Preheating Preheating
For best results, preheat your heated pad For best results, preheat your heated pad
for at least 10 minutes before use. for at least 10 minutes before use.
1. 1. Repeatedly press the temperature Repeatedly press the temperature
button setting until you reach heat button setting until you reach heat
level 6. level 6.
2. 2. Leave the heated pad to preheat for Leave the heated pad to preheat for
at least 10 minutes. at least 10 minutes.
Setting the Temperature Setting the Temperature
1. 1. Press the temperature setting button Press the temperature setting button
repeatedly to cycle through the six repeatedly to cycle through the six
available temperature settings. available temperature settings.
2. 2. The heat level will display on the The heat level will display on the
controller's LCD display. controller's LCD display.
Automatic Turn Off Automatic Turn Off
For your safety, your heated pad is fitted For your safety, your heated pad is fitted
with a 90-minute automatic off timer with a 90-minute automatic off timer
that begins when you turn the heated that begins when you turn the heated
pad on. After 90 minutes, the heated pad pad on. After 90 minutes, the heated pad
will turn off. will turn off.
If you would like to continue using your If you would like to continue using your
heated pad after the 90-minute timer heated pad after the 90-minute timer
has elapsed, turn it back on and use as has elapsed, turn it back on and use as
normal. If more than 10 minutes have normal. If more than 10 minutes have
elapsed, preheat your heated pad again. elapsed, preheat your heated pad again.
Manual Turn Off Manual Turn Off
1. 1. Press and hold the on/off button for Press and hold the on/off button for
three seconds. three seconds.
2. 2. Remove the power cable from the Remove the power cable from the
power socket. power socket.
Error Codes Error Codes
Error Code Cause
P The controller is not
connected properly.
E The heated pad has
been used while folded
or crumpled and has
overheated. As a safety
measure, it has turned
off.
C The controller has been
placed under the pad
and has overheated. As
a safety measure, it has
turned off.
WASHING
-
WARNING: ALWAYS
TURN THE HEATED
PAD OFF, UNPLUG THE
POWER CORD FROM THE
ELECTRICAL OUTLET AND
ALLOW THE HEATED PAD
TO COMPLETELY COOL
DOWN BEFORE HANDLING
OR CLEANING IT.
CAUTION: ALWAYS
DISCONNECT THE
CONTROLLER AND THE
POWER LEAD FROM THE
HEATED PAD BEFORE
WASHING. DO NOT
ALLOW WATER OR OTHER
LIQUIDS TO COME INTO
CONTACT WITH THE
Solution
Unplug the heated pad. En-
sure the controller and or con-
nector are connected properly.
Plug it back in to power and
use as normal.
Turn the controller off, unplug
the heated pad, lay it down
completely flat, and leave it to
cool down.
Turn the controller off, unplug
the heated pad, lay it down
completely flat, and leave it to
cool down.
REMOTE CONTROL OR
THE MAINS POWER PLUG.
CAUTION: DO NOT USE
ANY ABRASIVE CLEANERS
OR SOLVENTS, AS THIS
CAN DAMAGE THE
HEATED PAD.
CAUTION: WHEN
SEPARATED FROM
THE CONTROLLER, THE
HEATED PAD CAN BE
WASHED BUT NEVER DRY
CLEANED.
• Do not attempt to
clean the heated pad
in any other way than
that detailed by the
manufacturer.
English | 9 of 62