Tru-Test SRS2 Guia De Inicio Rapido página 5

Bluetooth
5
The stick reader will automatically connect to any Tru-Test
weigh scale indicator, or any other device, with which it has previously been paired
(when in BT Auto mode - default).
In order to manually establish a
non-Tru-Test weigh scale indicator, or you are having trouble establishing a
Bluetooth
wireless connection):
1.
2.
3.
4.
5.
6.
7.
Always turn on the device you are trying to pair with first, BEFORE the stick reader.
®
Bluetooth
With both devices off, position the stick reader close to the other device.
Switch on the device and, if necessary, check that its
is enabled.
Switch on the stick reader.
Select Settings, then Bluetooth to display the Bluetooth Settings
screen.
Select Search for devices.
A list of available devices will be displayed.
Select a device.
Wait for up to one minute until the two devices are paired. When
pairing is complete, the
Read/Select button will illuminate blue.
Use the stick reader to scan an EID tag in order to test the connection.
connection
wireless connection (if you are using a
Bluetooth
indicator light above the
Bluetooth
enabled
Bluetooth
setting
5