Atlas Copco LLA1000-U-EX Instrucciones Del Producto página 23

Idiomas disponibles

LLA1000-U-EX

6. Run the chain through the control yoke. Secure the end link with the screw

and washer, without twisting the chain.

7. Pull the chain through the hook using the wire.

Make sure that the standing links have the weld facing inwards from

the centre of the chain wheel and that the chain is not twisted.

8. Fasten the chain end to the hoist. Insert the pin through the end link of the

chain. Lock the pin with the locking pin.

9. Check that the chain runs correctly.

Illustration 1: LLA5000

Illustration 2: LLA980 and LLA1000

9839 0861 00