Publicidad
•
Never blow out nozzles and other small parts with the mouth.
•
Wash hands and face thoroughly after finishing work.
•
Keep plant protective agent device and protective agents away from children.
•
Do not spray on humans or animals.
•
Not intended for spraying of solvents, acidic or corrosive chemical agents and petroleum
products.
•
Protect device from heat sources and frost.
•
Use of the device on windy days is forbidden.
•
Admissible liquidity temperatures 1°C – 30°C.
Troubleshooting
The pump is pressurized but does not emit any liquid:
a) Check whether the filter and the nozzle of the spray lance are clean and clean if necessary.
No pressure is building up on the pump:
b) Activate the pump lever several times while the spray lance is closed and then open the pray
lance.
c) When a little fluid is in the container, activate the pump lever until a certain resistance is felt.
d) Check whether all closures are tightly screwed.
e) Check whether the seals are intact. Replace if need be.
Technical Data
Max. filling quantity
Net weight
Admissible operating pressure
Max. volume flow
Admissible operating
temperature
Original-Bedienungsanleitung FUXTEC Drucksprüher 20l_rev03
:
20 Liter
:
3,0 kg
:
1,0 MPa
:
0,9l/min
1°C – 30°C
:
11
Publicidad
