Canon B1 Guía De Usuario página 13

[2] Conveyor Section
The booklets delivered are laid out on the conveyor.
*1
Delivery Tray
This tray holds the stacked
booklets. It is removable.
(When the tray is removed, the
conveyor full condition not
detected, and continuous oper-
ation is possible.)
*1
Removing the delivery tray.
1. Loosen two locking knobs.
2. Lift the delivery tray up to remove.
3. Tighten two locking knobs.
Locking Knobs
1-4 Section Descriptions
Handle [TE]
Grip this handle and lift the roller unit when
removing the booklets on the conveyor.
Transport Belts
These belts move the booklets after they
are ejected.
Delivery Tray
Delivery
Transport
Rollers
Output booklets are
held by these rollers.
The position of the
rollers is set automati-
cally to match the
booklet size.
Booklet Detect
Sensor
This sensor detects
when the conveyor is
full of stacked booklets.