Descargar Imprimir esta página
Delta 833004-WH Serie Instrucciones De Instalación
Delta 833004-WH Serie Instrucciones De Instalación

Delta 833004-WH Serie Instrucciones De Instalación

Ensamble del asiento

Publicidad

Enlaces rápidos

Model/Modelo/Modèle
833004-WH
Series/Series/Seria
BEFORE YOU BEGIN
Remove your old toilet seat and review all the steps associated
with installation of your new Delta toilet seat. For additional support
please email us at customerservice@deltatoilet.com or visit
support.deltafaucet.com for Frequently Asked Questions.
ANTES DE COMENZAR
Retire su inodoro viejo y revise todos los pasos asociados
con la instalación de su nuevo inodoro Delta. Para ayuda adicional
y una lista de preguntas frecuentes, envíenos un correo electrónico
a customerservice@deltatoilet.com o visite support.deltafaucet.
com para ver las Preguntas frecuentes.
AVANT DE DÉBUTER
Enlevez la vieille toilette et examinez toutes les étapes de
l'installation de votre nouvelle toilette Delta. Pour obtenir du soutien
et consulter la liste des questions fréquentes, envoyez-nous un
courriel à customerservice@deltatoilet.com ou visitez support.
deltafaucet.com pour les questions fréquemment posées.
?
1-855-345-1345
customerservice@deltatoilet.com
2A
www.deltafaucet.com
108656
BIDET TOILET SEAT
ENSAMBLE DEL ASIENTO
SIÈGE
!
NOTICE / AVISO / AVIS
No harsh / abrasive cleaners
2B
Check seat alignment, adjust if need see
step 2C.
1
You may need:
Usted puede necesitar:
Articles dont vous pouvez
avoir besoin :
1
2C
11/09/2021 108656 Rev. A

Publicidad

loading

Resumen de contenidos para Delta 833004-WH Serie

  • Página 1 NOTICE / AVISO / AVIS BEFORE YOU BEGIN Remove your old toilet seat and review all the steps associated with installation of your new Delta toilet seat. For additional support please email us at customerservice@deltatoilet.com or visit support.deltafaucet.com for Frequently Asked Questions.
  • Página 2 Verify gasket is in place before installing Front Rear Verify gasket is in place before installing COLD WATER SUPPLY ONLY INLET FILTER CLEANING MAINTENANCE / MANTENIMIENTO / ENTRETIEN (clean every 6 months or when flow is low) Q Only clean the bidet seat with a mild soap (such as dish-washing soap) and warm water. Dry with a clean, soft cloth.