PRIOR TO FIRST USE
•
Remove all packaging and transport
materials from the inside and outside of
the appliance.
•
Check that the appliance has no visible
damage and that no parts are missing.
•
Before using for the first time (or after
prolonged storage without use), wash any
parts that will come into contact with food.
See "Cleaning".
MAIN COMPONENTS
1.
Speed selector
2.
I/On/off button for low/variable speed
3.
II/On/off button for high/fixed speed
4.
Motor unit
5.
Release button
6.
Stick mixer attachment
7.
Whisk attachment
8.
Whisk
9.
Chopping beaker attachment
10. Blade for chopping beaker
11. Chopping beaker
12. Measuring cup with lid
UK
USE AS A STICK MIXER
As a stick mixer, the appliance is designed for
mixing and puréeing liquids, dairy products,
sauces, fruit juices, soups, baby foods, etc.
1.
Attach the stick mixer attachment (6) to
the motor section (4) so that it clicks into
place.
2.
Plug the appliance into the mains.
3.
Lower the stick mixer attachment into the
food or the measuring cup (12) and press
the on/off I button (2) to start the appliance
at low adjustable speed. If necessary turn
the speed selector (1) to adjust the speed.
You can also press the on/off II button (3)
to start the appliance at the highest speed.
If you use this on/off button, the speed
selector's setting is not important, as the
appliance runs on the highest possible
speed. Keep the button pressed for as
long as you are blending.
4.
Move the stick mixer attachment up and
down and around in circles in the food. If
you purée or mix directly in a pan, remove
it from the heat first so that the appliance
does not overheat.
5.
The appliance must not be lowered so far
into the food that the coupling between
the motor unit and attachment comes into
contact with the food!
6.
Release the on/off button (2/3), and allow
the appliance to stop completely before
lifting the stick mixer attachment out of the
food.
USE AS A WHISK
As a whisk, the appliance is designed to whisk
whipping cream, egg whites, dessert creams,
etc.
1.
Attach the attachment (7) to the motor
section (4) so that it clicks into place.
Insert the whisk (8) into the attachment
(7).
2.
Plug the appliance into the mains.
23