Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands.
•
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure
than by hand.
•
Do not open the battery. Risk of short-circuiting.
•
In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and
seek medical help in case of complaints. The
vapours can irritate the respiratory system.
•
Use the battery only in conjunction with your
power tool. This measure alone protects the battery
against dangerous overload.
•
The battery pack can be damaged by pointed
objects such as nails or screwdrivers or by force
applied externally. An internal short circuit can occur
and the battery pack can burn, smoke, explode or
overheat.
4
SYMBOLS ON THE PRODUCT
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meanings. The correct
interpretation of the symbols will help you to use the
machine in a better and safer manner.
Symbol
V
-1
min
Explanation
Safety alert
CE Conformity
Read and understand all instruc-
tions before operating the product,
and follow all warnings and safety
instructions.
Wear ear protection.
Wear eye protection
Wear a dust mask
Wear safety gloves
Volts
Direct Current
No-load speed
English
Symbol
2
cm
mm
5
PROPOSITION 65
This product contains a chemical known to the
state of California to cause cancer, birth defects
or other reproductive harm. Some dust created by
power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
Lead from lead-based paints;
•
Crystalline silica from bricks and cement and other
masonry products;
•
Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Save these instructions.
6
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6
Explanation
No-load orbital stroke rate
Sanding sheet surface
Orbit diameter
Sanding plate diameter
WARNING
MEANING
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, could result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
Publicidad
