SurfaceMaxx SGY-PWA1002 Manual De Instrucciones página 6

INSTALLATION & PREPARATION
5. Take one of the outlet pressure hoses and starting with
the quick connect plug end slide it through the bottom of
the guide tube on the front of middle handle assembly.
(See Figure 5)
6. Attach the quick connect plug to the quick connect
socket. (See Figure 6)
7. Attach the quick disconnect on the other end of the hose
to the inlet plug. (See Figure 7)
8. Attach the other outlet pressure hose to the other
handle and inlet plug on the spray bar. (See Figure 8)
9. Insert the quick disconnect of the pressure hose onto
the quick connect plug on the trigger. (See Figure 9)
Outlet
Pressure
Hose
Figure 5
Quick Connect
Socket
Quick
Connect
Plug
Figure 6
Quick
Disconnect
Figure 7
Quick
Disconnect
Figure 8
Figure 9
6
Quick
Connect
Plug
Middle Handle
Quick
Connect
Plug
Quick Connect Plug
Quick
Disconnect
www.surfacemaxx.com