Safety - Tecno-gaz free 3 Instrucciones De Uso

2
The device must not be used in potentially explosive atmospheres.
Place the device away from sources of heat or electromagnetic radiation.
DO NOT OPEN THE DEVICE
DO NOT IMMERSE IN WATER
DO NOT WASH UNDER RUNNING WATER
Do not insert any items that may get in contact with the bottom of the bath
Do not pour acids (e.g. HCl) or chlorides into the bath
When cleaning, do not touch the liquid and items that transmit ultrasound.
The bath, frame, and cleaning liquid may heat up; avoid direct contact to prevent burns.
Risk of fire and explosion; do not use flammable cleaning agents during ultrasound
treatment
Follow the instructions on the safety data sheet of the liquid detergent / disinfectant used.
Under certain conditions, ultrasound can produce high noise.
Wear suitable PPE.
The electrical system must comply with the rating plate data and the regulations in force.
Verify that the system is appropriate for the characteristics of the device.
Check the integrity of the power cord before connecting the device.
Situations where it is essential to disconnect the power supply:
- FAILURE
- DANGER DUE TO LIQUID INTRUSION INTO THE DEVICE
- MAINTENANCE
- CLEANING

Do not remove the rating plate
In accordance with the regulations in force, the manufacturer is responsible for the
product placed on the market. Responsibility ceases the moment when operations are
performed on the device by unqualified personnel or with non-original spare parts.
The manufacturer declines all responsibility for damage to people or property if the device
is used improperly.

SAFETY

ENGLISH
3