Cleanmaxx CHAMP Manual De Instrucciones página 10

Storage
CAUTION
Risk of injury and damage!
The device may tip over on sloping sur-
faces.
Be aware of the weight of the device
during storage.
The device may only be operated in-
doors.
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the power cord plug.
Maintenance intervals
Daily
1. Clean the roller brush.
Weekly
Note
Visual brush inspection: The degree of
wear can be determined by comparing
the differently coloured indicator tufts.
Replace the roller brush when the
black bristles are the same height as
the red bristles.
1. Check the wear of the roller brush.
Cleaning the roller brush
1. Remove the brush cover if neces-
sary: Use a coin to turn the rotary
lock by 90° and remove the brush
cover.
2. Cut off hair and threads wound onto
the roller brush using scissors and
remove them.
Changing the filter bag
1. Unlock and remove the filter cover.
2. Turn the filter bag lock to the right to
unlock. Close the filter bag, remove
and dispose of it.
Illustration E
10
3. Insert a new filter bag and turn the
filter bag lock to the left to lock.
4. Fit and lock the filter cover.
Replacing the exhaust filter
1. Unlock and remove the filter cover.
2. Push the filter casing locking mech-
anism upwards and remove the filter
casing.
3. Remove the exhaust filter from the
filter casing.
4. Insert a new exhaust filter in the filter
casing.
5. Insert the filter casing and latch it in-
to place.
6. Fit and lock the filter cover.
Replacing the motor protection
1. Unlock and remove the filter cover.
2. Press the motor protection filter lock
upwards. Remove the old motor pro-
tection filter and dispose of it.
3. Fit and lock the new motor protec-
tion filter.
4. Fit and lock the filter cover.
Replacing the roller brush
1. Dismantle the side part with the help
of a coin.
2. Pull out the old roller brush and dis-
pose of it.
3. Insert the new roller brush.
4. Remount the side part.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Remove the blockage
Suction pipe/suction hose
Illustration F
Suction hose at brush head
Illustration G
English
filter