SEA ALPHA 200 PLUS Instrucciones De Montaje página 27

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
As for transport, behave as for packages of the same dimensions.
Be very careful for eventual lifting in the packing weight and linking points.
Load must be well shared between the linking points; it has to be centred and well balanced as well.
Use the hoist or lifting stripes with a tackle to share the load.
While using the lifting stripes do not deform the package.
Don't use tools which could compromise the balance during the lifting process. Don't touch or deform the product on the move.
Use licensed lifting tools; read carefully the instructions as for means of transport and tools (e.g. tackle, hoist etc.)
Product can be carried by means of transport. Loading limits and local transport laws must be respected.
Prevent the packed good against twists or moves during loading and transport.
Remember safety instructions while lifting or transporting the product.
SEA S.r.l. is not responsible for damages on the transport unless the transport is on its charge.
If an already installed product must be transported it has to be uninstalled and dismantled in its parts as it was before assembling. The elements
must be packed as if they were newly packed. Therefore follow the before mentioned instructions.
PLEASE NOTE! SEA, forbids the lifting and transport of already installed products not being uninstalled, well dismantled and correctly packed.
PLEASE NOTE! It is forbidden whatever transport form or means different from the before mentioned ones.
If the product is scrapped get rid of it in the right way (e.g. separate metal, rubber, wires, oil). Refer to authorised factories according to the
disposal of waste material law.
In its continuous striving to improve its products, SEA has the right to adjust it at any time without warning. SEA is not obliged to adjust the
products manufactured in the past.
Refer either to the factory where the product was bought or to SEA area distributor indicating the replacing part. For electrical and electronic
waste, this marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling. (Applicable in the European Union and other European countries, with separate
collection systems).
For the warranty conditions see the official SEA price list.
The warranty is a replacement of the faulty part if the damage is due to faults in the material or manufacturing. Under no circumstance Sea
responsibility will exceed the single part buying price. Therefore the purchaser will not be refunded for damages such as:
loss of production;
loss of profit or selling;
machines stop;
whatever circumstantial damage, non applicable to the simple use of the product.
Warranty is also not applicable in the following circumstances:
irrational or faulty uses of the product;
transgression of the use, maintenance and safety instructions;
non authorised adjustments;
assembling of non original spare parts;
passing the power limits in the data;
connection to a non conformity electric net;
if the product is being resold even within the warranty time;
laws in the customer country.
Parts being normally used (e.g. gaskets, bearings) and general consumption materials (e.g. oil, grease etc.) are excluded from warranty unless
being faulty in the assembling or manufacturing.
SEA is not responsible for damages or accidents being produced by eventual product breaking if they are consequent to instruction default.
Eventual damages occurred in the transport or delivery, are excluded from warranty unless the transport is on SEA charge.
IMPORTANT!
Warranty is not valid and SEA is not responsible if SEA original spare parts are not being used.
67410595
®
INSTRUCTIONS FOR OUT SERVICING
INSTRUCTIONS FOR THE ELECTRICAL SYSTEM
ADJUSTMENTS
SPARE PARTS
WARRANTY
REV 06 - 07/2010
71