ZYMBO REVERSO CONTROL Serie Guia Del Usuario página 7

Celsius/Fahrenheit function "℃/℉" :
Press "℃/℉" button to switch between "Celsuis" and "Fahrenheit".
Timer ON/OFF:
After pressing "TIMER ON" or "TIMER OFF" buttons, the timer indicator is displayed, and the A/C is now in timer
state.
Child Lock:
Lock: Press " " and "LOCK" buttons at the same time, then the "
Unlock: Press "
screen.
Clock:
Press and hold " " and "MODE" buttons at the same time and the remote control will enter into a clock
mode, with corresponding hour digits starting to flash.
Press "TEMP " (TEMP
increase or decrease continuously.
Press " " button to complete setting the appropriate hour.
At this point, the corresponding minute digits begin to flash, use the "TEMP
appropriate minutes.
After setting minutes, press "
Backlight
The backlight covers the whole panel. Press any button to light it, and it will switch off after 10 seconds if there is
no operation.
LED Flashlight
Press&hold the "LED
Led receiver indications
9. Electric schema
Refer to last section in the manual.
" and "LOCK" buttons at the same time, then the "
) button to increase (decrease) 1 hour at each press. Hold for 2 seconds to
" button to quite clock settings.
" button to switch on the LED light, release it to switch it off.
" icon will appear on the display screen.
" icon will disappear from the display
7
" (TEMP ) button to set