Publicidad
Idiomas disponibles
Idiomas disponibles
1 Nozzle
2. On/Off switch with stage selector
Technical Data
Heat gun
Voltage
Rated power
Air flow
I
II
Temperature at the nozzle outlet (approx.)
I
II
Weight
Protection class
Operation
Switching On and Off
To switch on the power tool, push the On/Off switch to the position I or II.
Some smoke may be emitted after switching on; this does not indicate a
problem.
To switch off, push the On/Off switch to the stop in position "0".
After working for a longer period at a high temperature, operate the power tool
for a short period in the position I before switching off.
Thermal-protection shut-off: In case of overheating (e.g. due to air
build-up), the power tool automatically shuts off the heating system, but the
blower will continue to run.
FHG20004
220-240V ~50/60Hz
2000W
300 l/min
500 l/min
0
350
C
0
600
C
0.78Kg
II
Publicidad
