Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Maintenance and service operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
MIRROR BALL 8"
Di
ameter:
8" - 20 cm
Motor:
MTL 205 - 208
MIRROR BALL 16"
ameter:
16" - 40 cm
Di
Motor:
MTL 208
(Motor recommended, sold separately)
MIRROR BALL 12"
Di
Motor:
MIRROR BALL 20"
Di
Motor:
MIRROR BALL (8"/12"/16"/20")
4
ameter:
12" - 30 cm
MTL 205 - 208
ameter:
20" - 50 cm
MTL 208
User Manual / Manual de uso
Publicidad
Tabla de contenido
