Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (Undermount Sink)
10. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
10
a
Note: This vanity base comes with two
different handle/knobs options.
11. To change the handle on the tip-out door, gently
open the tip-out door (F) and use the Phillips
screwdriver to loosen the screws holding the solid
wood tip-out tray. Once loosened, simply lift and
slide up to remove (per diagram 11). This
provides access to the two door handle screws.
One set of knobs (BB)/handle (CC) are packaged
separately in the box. If you would like to
switch handles, simply remove the existing
handles and attach the other finish, as
illustrated in the diagram.
Repeat the same step for the doors (G & H).
Hardware Used
Knob
BB
Handle
CC
2
2
a
2
2
b
11
x 2
x 1
21
c
CC
3
F
H
G
2
2
c
Publicidad
